2-2
1345678
2
pocH-100
i
Revised June 2008
ANALYSIS
INTRODUCTION
2.1. ANALYSIS
2.1.1. Screen display
The LCD screen shows the available functions and submenus.
Ready Analysis can be started.
Aspirating Sample is being aspirated.
Dispensing Diluent is being dispensed.
Running Analysis operation is being performed.
Not Ready Analysis cannot be started.
Instrument status indicator
Screen name
Remaining reagent volume indicator
Paper feed
Help
Use this indicator only as a guide.
Feed paper on any screen.
Blinks in case of an error.
Short beep (< 1sec) Pressing a button
Long beep ( >1sec) Input error
Continuous beep Instrument error
Alarm
LCD backlight dimmer Dims backlight after 10 min.
Automatic rinse timer Prevents drying up of the hydraulic lines, after 2 hours of non operation.
Shutdown warning timer Reminder to shut down the device after 24h of continuous operation.
Timer functions
Important
The alarm can be stopped by pressing "OK" on the
error dialog box. Pressing the
-button displays
the help menu. All other buttons are not functional
during an alarm.
To Next Page
Loading...
