SYSMEX pocH-100i - 4.1.3. Shutdown Procedure

4-3
123 5678
4
4
3
1
2
pocH-100
i
Revised June 2008
CLEANING & MAINTENANCE
INTRODUCTION
4.1.3. Shutdown
Removesdepositsintheinstrumentstubing.
Follow instructions on the screen.Then
switchO F F.
Daily
•Depositsintheinstrument‘s tubingcancause
incorrectanalysisresults.Therefore,thetrans-
ducer chambers and diluted sample tubes must
becleaned.
•If theinstrumentisusedcontinuouslywithout
performingtheshutdownsequence,proteinclot-
ting may cause incorrect analysis results or it
maydamagetheinstrument.
Incorrect analysis results
Processbegins.
Process begins.
Follow instructions on the screen.
Then switch OFF.
4.1. CLEANING
Press"Shutdown".
Press "Shutdown".
Press"Execute".
Press "Execute".