SYSMEX pocH-100i - 2.1.12. Shutdown Procedure

ANALYSIS
1 345678
2
2 -15
1
2
3
4
5
ANALYSIS
INTRODUCTION
pocH-100
i
Revised February 2011
Incorrect analysis results
Press "Shutdown".
Press "Execute".
Shutdown begins. Process takes approx. 2
min.
Shutdown completed.
Switch OFF the instrument.
• If the instrument is used continuously without
shutting it down periodically, protein build-up
on the internal parts may inhibit correct analysis
results, and may damage the instrument.
• If the instrument is turned OFF without execut-
ing a shutdown, water droplets may seep from
the pipette or deposits may build-up on the
rinse cup.
Press "Shutdown".
Press "Execute".
Shutdown begins.
Shutdown completed.
Switch OFF .
Important
Execute a shutdown at least every 24 hours. This
may prevent damage to the instrument.
2.1. ANALYSIS
2.1.12. Shutdown