SYSMEX pocH-100i - 1.3.11. Sample Collection Tube Setup

1-18
2345678
1
1
2
4
5
3 6
•WhenSARSTEDTisselected,use "S-MONOVETTE
EDTAK"collectiontubesmanufacturedby
SARSTEDT.
• S-MONOVETTE(SARSTEDT)samplecollectiontubes
cannot be used together with other sample collection
tubes.
If this is ignored, the instrument will not work.
Important
In this section, only the basic and relevant installa-
tion settings are described. For details on all pos-
sible settings see "Settings & Calibration" page 5-1.
Note
1.3.11. Sample collection tube
S-MONOVETTE (SARSTEDT) tube has a different bottom shape compared to the other sample tubes.
Press "Menu".
Press "Settings".
Press "Settings".
Press "System".
Press "System".
P r e s s " Tu b e " .
Pres s "Tube ".
Select tube.
Select tube.
Press "Save" and "OK".
STANDARD:
for standard tubes
S A R S T E D T:
for S-MONOVETTE
tubes
pocH-100
i
Revised June 2008
INTRODUCTION
SYSTEM OVERVIEW, TECHNICAL INFORMATION & SETUP
Press "Menu".
Press"Save"and"OK".