SYSMEX pocH-100i - 1.3.4. Connect pocH-pack 65;65 XL

1-12
2345678
1
1
2
3
4
Set the reagents and remove caps. Set the reagents and remove caps.
Set the reagents and remove caps.
Set the reagents and remove caps.
*
Insert container spout kits/ float
switch and reapply the caps.
Insert container spout kits/ float
switch and reapply the caps.
Insert container spout kits/ float switch into
the correct bottle and reapply the caps.
Insert container spout kits/ float switch into
the correct bottle and reapply the caps.
*
Connect the tubes to the nipples. Connect the tubes to the nipples.
Connect the tubes to the appropriate nip-
ples. Connect the wiring cord.
Connect the tubes to the appropriate nip-
ples. Connect the wiring cord.
1.3.4. Connect the pocH-pack 65/pocH-pack 65XL
pocH-pack 65 pocH-pack 65XL
Fix tubes together.
Fix tubes together.
Biological risks
To avoid infections, wear protective garments
and gloves for cleaning and/or maintenance.
After completion of work, wash hands with
disinfectant.
• Connectthetubestothecorrectnipples;
• Donottotouchthetubesthatentertherea-
gent;
• Preventthereagentsfromspilling.
* The pocH-pack 65XL does not have waste
container.
Important
INTRODUCTION
SYSTEM OVERVIEW, TECHNICAL INFORMATION & SETUP
pocH-100
i
Revised February 2011