SYSMEX pocH-100i - 3.2.3. X Method QC (Open Pipette)

3-15
12 45678
3
2 5
7
6
9
1
3
4
8 11
12
10
QUALITY CONTROL
INTRODUCTION
pocH-100
i
Revised February 2011
3.2.3. STEP 3: b) Performing quality control: X
_
method (for open pipette)
Daily
Insert control blood and close door.
Insert control blood and close
the door.
Remove the control blood, mix well and
insert it back into the sample position.
Mix well and insert it back into
the sample position.
3.2. PERFORMING QUALITY CONTROL
Insert correct adapter.
Insert adapter.
Set the spacer to an adapter.
Set the spacer to an adapter.
Select analyzing File.
Select analyzing File.
Press "QC".
Press "QC".
Press "Run".
Press "Run".
The first analysis results appear. Press
"Next" to perform the second analysis.
Press "Next" to perform the sec-
ond analysis.
Open sample position.
Open sample position. The final results appear.
The final results appear. Scroll the results
by pressing " " or " " and press "Print".
Press "Run" to perform second analysis.
Press "Run".
Remove the cap.
Remove the cap.
The sample tube caps have to be removed
before measurement.