1
12345678
INTRODUCTION
INTRODUCTION
pocH-100
i
Revised April 2013
ADDRESSES SYMBOLS
Head Office Japan
SYSMEX CORPORATION
1-5-1 Wakinohama-Kaigandori
Chuo-ku, Kobe 651-0073
JAPAN
Europe
European Representative
SYSMEX EUROPE GmbH
Bornbarch 1
22848 Norderstedt, Germany
Phone: +49 40 5 27 26-0
Fax: +49 40 5 27 26-100
Asia-Pacific
SYSMEX ASIA PACIFIC PTE LTD.
9 Tampines Grande, #06-18,
Singapore 528735
Phone: +65-6221-3629
Fax: +65-6221-3687
Americas
SYSMEX AMERICA, Inc.
577 Aptakisic Road
Lincolnshire, IL 60069, U.S.A.
Phone: +1-224-543-9500
Fax: +1-224-543-9505
• Ordering of supplies and replacement parts
To order supplies or replacement parts, please contact your
local Sysmex representative.
• Service and maintenance
Please contact the Service Department at your local Sysmex
representative.
Symbols to indicate biological risks, warnings and helpful information are presen-
ted throughout this manual to call to attention important information on safety
and handling. Non-compliance with this information compromises the safety fea-
tures incorporated in the analyzer.
Indicates the risk of serious injury or
death by biohazardous materials or
conditions.
Biological risks Warning
If this sign is ignored and the instru-
ment is operated incorrectly, there is a
potentially hazardous situation which
may result in injury of an operator.
If steps indicated by this sign are ig-
nored, analysis results may produce
erroneous data.
Incorrect analysis results
Indicates information which is useful in
operating the instrument.
Note
Indicates that the marked component
can be hot. Do not touch.
Warning, hot
High voltage exceeding 1 kV.
Danger, electric shock
Important
Indicates what you need to know in
order to maintain instrument perform-
ance and to prevent damage.
INTRODUCTION
To Next Page
Loading...
