SYSMEX pocH-100i - Page 71

12 35678
4
4 -14
13
14
15
pocH-100
i
Revised June 2008
CLEANING & MAINTENANCE
INTRODUCTION
Danger, electric shock
Re-attachthetransducerchamberplugsecurely.
Otherwise,reagent leakagemightoccur, which
maycauseashortcircuitorelectricalshock.
Apply CELLCLEAN to transducer brush,
cleanaperturegently.
Clean aperture gently.
Closeallcovers.Tightenthescrews.
Close all covers. Tighten the screws.
PluginpowercordSwitchONinstrument.
(
*
1)
Switch ON the instrument.
Always wear protective garments and gloves for
allserviceandmaintenancework.Useonlyspeci-
fied toolsand parts.Aftercompletionof work,
washhandswithdisinfectant.Instrumentsthatgot
incontactwithbloodhaveinfectiouspotential.
Biological risks
Ifperformingmaintenance work,use only the
speciedtoolsandparts.Installonlysuchspareor
replacementpartsintendedforthisequipment.
*
1
. Be sure to turn the main switch ON after com-
pletionofthecleaningprocedure.
If the auto rinsing is not performed after clean-
ing,theinstrumentmaymalfunction.
Important
Beforestoring,rinsethebrushwithwatertocom-
pletelyremovetheCELLCLEAN.
Note