Systec DB-45 - Scope of Delivery; Setting up the Device; Cleaning the Surfaces

V/D S ERIES
C OMMISSIONING
Revision: 2.1 2-5
2.1.2 Scope of delivery
− Device
− Operating manual
− Hoses (according to available device connections)
− Accessories (according to delivery note)
Note
Some accessories are located in the sterilisation chamber.
• Check that the scope of delivery is complete and undamaged.
2.1.3 Setting up the device
• Set up the device at the position where it will be used and align it with a
spirit level.
Separate assembly instructions for pass
-
through
autoclaves!
Pay attention to the corresponding assembly instructions when
setting up pass-through autoclaves.
2.1.4 Cleaning the surfaces
• If necessary, clean the outer surface of the housing.