V/D
S
ERIES
T
ROUBLESHOOTING
Revision: 2.1 7-3
7.2 Logs
The process log and error log can be viewed as follows:
• Press the Menu button in the basic state to access the main menu.
Use the arrow buttons to select the desired menu item and press Set to
confirm.
• Select Service -> Memory -> Logs.
The following submenus are available here:
Process Log: Shows a list of the last ten sterilisation cycles.
• Select the batch number.
• Press Set to print this batch.
Error Log: Shows a list of the stored error messages.
• Select an error message.
The following menu items appear, showing the state at the time of the error:
− General info
− Analog inputs
− Digital inputs
− Digital outputs
To Next Page
Loading...
