WEB Interface 107
ID: um_t2gateway CP560 DVB-T2 Gateway User’s Manual Rev. 2.2 (3686)
Max rate
The maximum bit rate measured for this service since the last reset. Resets when the PID
rates are reset.
In DVB mode the second section, Service SDT Details, will be present only if the SDT table is
present and analysed. It consists of the following parameters:
Service name
The name of the service.
Service provider
The provider of the service.
Service type
The type of service.
EIT schedule signalled
Whether the EIT schedule information is signalled to be present for this service. This
information is extracted from SDT actual.
Scrambling signalled
Whether scrambling is signalled for the service. Interpretation of the Free_CA bit in SDT
actual.
EIT P/F signalled
Whether EIT present/following information is signalled to be present for this service. This
information is extracted from SDT actual.
Running status
The running status of the service as signalled in SDT actual.
In ATSC mode the second section is named Channel Details and shows the following parameters
from the VCT table if it is present and analysed:
• Channel name
• Major channel number
• Minor channel number
• Service type
• Modulation mode
• Channel TSID
• Access controlled
• Hidden
• Hide guide
To Next Page
Loading...