190 Alarms
CP560 DVB-T2 Gateway User’s Manual Rev. 2.2 (3686) ID: um_t2gateway
Table G.2 Fields in the alarm description table
Field Description
Alarm ID Unique identifier (number) for this alarm. There are no duplicates in the table, e.g. a specific alarm
number always maps to a specific alarm.
Text A short text describing the alarm
Description A longer text describing the cause of the alarm
Def. severity The default severity of the alarm
Type Alarms are grouped together into different types. This field contains a textual description of the type.
Type ID Each alarm type has a corresponding number (ID).
Clear event Set to Yes if an “off/cleared” alarm is expected after an “asserted” alarm. In most cases the value is
Yes. For “stateless” alarms, e.g. the event that a user has logged into the system, no explicit clear
events are expected.
Subid2 This field is present if the Subid2 value of the alarm type is used. The text in the table describes the
usage of the Subid2 value.
Subid3 This field is present if the Subid3 value of the alarm type is used. The text in the table describes the
usage of the Subid3 value.
To Next Page
Loading...