Alarms 191
ID: um_t2gateway CP560 DVB-T2 Gateway User’s Manual Rev. 2.2 (3686)
Table G.3.a Alarms
Alarm ID Text Def. severity Details
106 Unable to transmit Critical
Description: Channel not able to transmit any data, or only part of the data is transmitted.
Type: IP Output (Type ID = 24)
Clear event: Yes
Subid2: IP output channel identifier
Subid3: Dest
130 Ethernet link down Critical
Description: No link on Ethernet layer.
Type: Ethernet port (Type ID = 17)
Clear event: Yes
Subid2: Ethernet port ID
131 Ethernet output overflow Critical
Description: The total bitrate of the streams to transmit is too high compared to the
available ethernet bitrate.
Type: Ethernet port (Type ID = 17)
Clear event: Yes
Subid2: Ethernet port ID
133 Generic SFP alarm Critical
Description: Generic SFP alarm for Mipot and SFF-8472 based modules.
Type: Ethernet port (Type ID = 17)
Clear event: Yes
Subid2: Ethernet port ID
134 Ethernet link problem Critical
Description: Problem on the ethernet link
Type: Ethernet port (Type ID = 17)
Clear event: Yes
Subid2: Ethernet port ID
140 IP address unresolved Warning
Description: IP address is not resolved into physical MAC address.
Type: IP Output (Type ID = 24)
Clear event: Yes
Subid2: IP output channel identifier
Subid3: Dest
150 RTP sequence error Warning
Description: Analysis of the sequence number of the RTP layer indicates that IP frames
have been lost or that they have been received out of order.
Type: IP Input (Type ID = 23)
Clear event: Yes
Subid2: IP input channel identifier
151 No data received Warning
Description: No data received on Ethernet input for stream.
Type: IP Input (Type ID = 23)
Clear event: Yes
Subid2: IP input channel identifier
153 Ethernet input overflow Critical
Description: The total bitrate of the IP input streams is too high.
Type: Ethernet port (Type ID = 17)
Clear event: Yes
Subid2: Ethernet port ID
To Next Page
Loading...