Tektronix TDS5052 User Manual

TDS5000 Series User Manual
3-3
Acquiring Waveforms
Before you can process a waveform, you must acquire the signal. This
oscilloscope comes equipped with the features you need for capturing your
waveforms before further processing them according to your requirements. The
following sections cover capturing signals and digitizing them into waveform
records:
H Signal Connection and Conditioning: Connecting waveforms to the
oscilloscope channels; scaling and positioning the channels and time base for
acquiring waveforms.
H Setting Acquisition Contr ols: Choosing the appropr iate acquisition mode for
acquir ing wavef orms; starting and stopping acquisition.
H Acquisition Control Background: Background information on the data
sampling and acquisition process.
H Using Fast Acquisition Mode: Using Fast Acquisition mode to capture and
display transient events, such as glitches or runt pulses, which are often
missed during the long dead times that are a normal part of digital oscillo-
scope (DSO) operation.
H Using FastFrame: Using FastFrame to capture many records in a larger
record, and then view and measure each record individually.
Figure 3--1 shows how this process fits into the overall oscilloscope operation.
Acquisition
system
Input
Display
Storage
Waveform
transform
system
Horizontal
time base
Trigger
Figure 3- 1: Oscilloscope System Overview: Signal Acquisition

Tektronix TDS5052 Specifications

General

Brand	Tektronix
Model	TDS5052
Category	Test Equipment
Language	English