Data Input and Output
TDS5000 Series User Manual
3- 187
Use this procedure to recall a setup. Remember that recalling a setup replaces the
existing setup, which is lost.
Overview To recall a setup Control elements and resources
Prerequisites
1. The oscilloscope must be powered on, and you must
have access to a previously saved setup.
See Power ing On the Oscilloscope on page
1--8, and Saving a Setup on page 3--185
Display the
Instrument
Setup control
window
2. From the toolbar, cli ck Setups and select the Recall
Setups tab of the Instrument Setup control window.
Recall the
setup
3. Click the number of the setup that you want to recall.
The current oscilloscope setup is overwritten.
Recalling a Setup