Acquiring Waveforms
TDS5000 Series User Manual
3-27
Overview Control elements and resourcesTo start and stop acqui sition
Stop acquiring
3. Push the RUN/STOP button to stop acquisition.
Acquisition will also stop if triggering ceases while in
normal trigger mode.
Take a single
acquisition
4. Push the front-panel SINGLE button t o start acquiring
and acquire enough waveforms to satisfy the acqui sition
mode.
For more help
5. Refer to references listed at right.
Refer to Setting Acquisition Modes on page 3--25.
See page 3--209 for information on online help
To Next Page
Loading...
