Terumo CAPIOX EBS Circuit with X coating User Manual

Other Operation Procedures
• When tapping [Cancel], the key lock is not disabled, and the key lock remains enabled.
• When an alarm or alert is issued while key lock is enabled, the key lock is automatically cancelled, and the colour indicators
on the key lock icon and key lock button will turn off.
Count Up Timer
This system has two count up timers.
When the power is turned on, “00-00:00:00” is displayed in the count up timer indicator.
 Starting/stopping the timer
1. Tap the count up timer indicator. (Figure 2-17)
The following figures show the count up timer 1 being used.
The timer starts and the elapsed time is displayed.
While the timer is activated, it is lit in green.
Figure 2-17
2. Tap the count up timer indicator again. (Figure 2-18)
Figure 2-18
The timer count is stopped. When the timer is stopped, its colour will return to
grey. (Figure 2-19)
Figure 2-19
 Restarting the timer
1. While the timer count is stopped, tap the count up timer
indicator. (Figure 2-20)
2. Tap [Restart], and tap [OK]. (Figure 2-21)
Figure 2-20
The timer count restarts. (Figure 2-22)
Figure 2-21
Figure 2-22
75
Notes

Terumo CAPIOX EBS Circuit with X coating Specifications

General

Brand	Terumo
Model	CAPIOX EBS Circuit with X coating
Category	Medical Equipment
Language	English