Operation Procedure
Move the Cart by holding the handles with the caster locks released. (Figure 1-74)
Figure 1-74
Attaching Other Products to the Cart
Attach the following products to the Cart with its casters locked.
To secure the products to the IV pole, attach it below the level of the IV pole knob.
1. Attach the gas blender to the front side poles (Figure 1-75)
or to the IV pole (Figure 1-76).
Be careful not to bend the gas hose.
• The gas blender is secured.
Refer to the instructions for use of the gas blender (e.g., mounting
instructions).
Figure 1-75
61
Moving the Cart
Attaching the Gas Blender
Check
Handles
Caster
Casters
Gas blender
Poles
To Next Page
Loading...
