Terumo CAPIOX EBS Circuit with X coating User Manual

Operation Procedure
Preparation Before Use
The preparation steps prior to using are shown below.

page 29

page 29

page 31

page 33
Continue to “Inspection Before Use”

page 122
28
Connect to ABD/Flow Sensor

page 36
When using the air bubble detector function, after
connecting the ABD/Flow Sensor and turning
the power on,
turn the setup of the air bubble
detector function on.

page 37
When using the temperature measuring function,
after connecting the Temperature Sensor
Cable and turning the power on,
turn the setup
of the temperature measuring function of the
channel to be used on.

page 37
When using the pressure measuring function,
after connecting the Pressure Sensor Cable
and turning the power on,
turn the setup of the
pressure measuring function of the channel to be
used on.

page 38
When using the Fast Clamp, after connecting
the Fast Clamp and turning the power on,
turn
the setu
p
of the Fast Clam
p
on.
Use the
temperature
measuring
function
NO
YES
Use the pressure
measurin
g
function
YES
NO
YES
Use the Fast Clamp
NO
Connect to Fast Clamp
Connect to Pressure Sensor
Cable
Connect to Temperature
Sensor Cable
Connect to Drive Motor
Connect to AC Power Cable
Attach the Controller to the
Cart
Prepare the Necessary
Devices

Terumo CAPIOX EBS Circuit with X coating Specifications

General

Brand	Terumo
Model	CAPIOX EBS Circuit with X coating
Category	Medical Equipment
Language	English