Terumo CAPIOX EBS Circuit with X coating - Turning the Power Off

Operation Procedure
4. Tap [Clamp] (Figure 1-66) to close (up position) the plunger
of the Fast Clamp.
• Perform with the tube attached.
5. Tap [Cancel] to close the screen. (Figure 1-67)
Figure 1-66
Figure 1-67
1. Press the power button. (Figure 1-68)
Figure 1-68
2. Tap [OK] after confirming the message displayed.
(Figure 1-69)
“Now Shutting Down” is displayed on the message area, and the power is
turned off.
• The power can be also turned off by pressing twice or pressing and holding the
power button.
Figure 1-69
58
Note
Turning the Power Off
Note
Power button