Maintenance and Inspections
Serial number: Date: / / Person in charge:
Check items
Inspection before each use
Inspection of the
external appearance
(Before each use)
• Are there any significant scratches or damage in the appearance?
• Are there any scratches or pinch marks on the outer covering of the cables?
• Are there any foreign items or damage in the connectors?
• When turning the motor speed knob, does it turn smoothly?
Pass
Pass
Pass
Pass
Fail
Fail
Fail
Fail
Inspection of start-up
sequence (Before
each use)
• Do the following buttons and indicators in the control panel flash three times?
• Auto priming button
• Coast release button
• Key lock button
• Flow indicator
• Motor speed indicator
• Does the status lamp flash from green to yellow to red?
• Does the motor speed indicator lamp turn from green to orange in a clockwise
direction?
• Does the battery indicator lamp flash twice repeatedly in the following sequence?
→ →
(None, none, red) (None, green, green) (Green, green, green)
• When the start screen is displayed, is an activation sound heard?
• Does the main screen appear?
<Confirmation items after the main screen is displayed>
• Is the Serious System Error or the System Error issued?
• Is the AC power lamp lit and is the AC power indicator
?
• Is there more than 70% battery charge level?
Pass Fail
Pass
Fail
Pass Fail
Pass Fail
Pass
Fail
Pass Fail
Pass
Fail
Pass Fail
Pass Fail
Inspection of the
battery-powered
operation function
(Before each use)
<When the AC power cable is unplugged>
• Is the Battery-powered operation started Alarm issued?
• Does the AC power lamp turn off?
• Does the AC power indicator change to
?
Pass
Pass
Pass
Fail
Fail
Fail
<When the AC power cable is plugged in>
• Does the On Battery Alarm stop? Pass Fail
• Does the AC power lamp light up? Pass Fail
• Does the AC power indicator change to
?
Pass Fail
Inspection of the Drive
Motor Disconnected
Alarm and the
ABD/Flow Sensor
Disconnected Alarm
(Before each use)
<When the plug of the Drive Motor is disconnected and the power is turned on>
• Is “Drive Motor Disconnected” displayed on the message area and does an alarm
sound?
• Does the alarm mute when tapping
?
<When the plug of the ABD/Flow Sensor is disconnected and the power is turned on>
• Is “ABD/Flow Sensor Disconnected” displayed on the message area and does an
alarm sound?
• Does the alarm mute when tapping
?
Pass
Pass
Fail
Fail
Pass Fail
Pass Fail
129
SP-200 Maintenance/Inspection Check List
To Next Page
Loading...
Need help?
General
