Operation Procedure
1. Attach the Hand Crank to the IV pole, and secure it with the
knob. (Figure 1-81)
• The Hand Crank is secured.
• The flexible shaft is attached at a height where it does not come into contact with
the caster or the ground.
Figure 1-81
64
Attaching the Hand Crank
• When using the Hand Crank, attach it to a pole securely after ensuring there
is enough space and tube length so that the crank can rotate smoothly. It
may become impossible to maintain circulation.
Caution
Checks
Hand Crank
IV pole
Knob
Flexible shaft
To Next Page
Loading...
