Various menu settings
<<Setting the threshold value of the Temperature Alert>>
4. Confirm that [Alert] of the upper limit is selected.
(Figure 3-22)
5. Tap or to input the upper limit value you want to set.
(Figure 3-23)
“
(yellow)” indicates the threshold value of the High Temperature Alert in
accordance with an input temperature.
Figure 3-22
6. Tap [Alert] of the lower limit. (Figure 3-24)
Figure 3-23
7. Tap or to input the lower limit value you want to set.
(Figure 3-25)
“
(yellow)” indicates the threshold value of the Low Temperature Alert in
accordance with an input temperature.
Figure 3-24
8. Tap [OK] to complete the setting. (Figure 3-26)
Figure 3-25
Figure 3-26
• If you do not tap [OK], the changes to the setting will not take effect.
89
Note
To Next Page
Loading...
