Operation Procedure
2.
Pull the lever of the Cart in the direction of the arrow.
(Figure 1-3
a
)
3. Align the rubber feet of the front side of the Controller
with the Cart guide, and place the Controller on the Cart.
(Figure 1-3
b
)
• At this time, the rubber feet are elevated.
Figure 1-3
4. Pull the lever of the Cart in the direction of the arrow to
secure the Controller to the Cart. (Figure 1-4)
• The Controller is secured to the Cart.
Figure 1-4
30
Note
Check
Rubber
feet
Lever
Guide
Lever
To Next Page
Loading...
