Strata DK40 I&M Manual Spring 1999
4-1
Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.
DK40
Universal Slot PCB Wiring
4
This chapter contains point-to-point wiring diagrams for connection of telephones, lines,
peripheral equipment, and power supplies for the universal slot PCBs of both the Strata DK40
Expansion KSU.
Wiring diagrams are divided into groups according to the PCB which provides the interface
for, or controls the operation of, the associated equipment, as listed below:
◆ Station Wiring:
◆
Digital Stations
◆
Electronic Stations
◆
Analogue Stations
◆ Power Failure Cut-through (DPFT) Pin-outs
◆ Exchange Line Wiring
◆ Tie Line Wiring
◆ Option Interface PCBs
Note
Before using the Connect Record Sheets (following each Wiring Diagram), make
copies for future use.
Diagrams which apply to only the DK40 Base KSU are in the installation chapter which
relates to the system. See Chapter 2 – DK40 Installation:
The RPTU/RBSU/RBSS cable connection information is in Chapter 3 – DK40 Universal Slot
PCBs.
To Next Page
Loading...
