Peripheral Installation
System Database Printout Using SMDR Port
6-44
Strata DK40 I&M Manual Spring 1999
Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.
System Database Printout Using SMDR Port
If a printer is connected to the SMDR port, customer program information stored in the
DK40 RAM may be printed out for reference (see Figure 6-24).
Program 97
◆ Enables system program data to be printed via the SMDR port. See Program 97 record
sheet , in the Strata DK40 Programming Manual.
Notes
◆ An SMDR printer must be connected to the SMDR port to use the printout option
selected by Program 97.
◆ Call record data is lost when program data is printed out with Program 97.
Voice Mail Options
Strata DK40 systems can support a Toshiba Stratagy, Stratagy DK, or customer-supplied
voice mail system.
Voice mail systems connect to standard telephone circuits (KSTU3, RSTU2 or PSTU). The
number of circuits required by each device depends on the customer’s voice mail
requirements, such as the number of voice mail users. To support voice mail, DK40 KSU
must have K5RCU installed.
Voice mail integration is provided by Strata in-band tones (DTMF integration).
Program Number
Port Number
1
1
1
0
1
0
1
0
1
0
1
0
1
0
1
0
8
1
8
0
9
1
9
0
11
0
12
1
12
0
81 000
81 001-027
## END OF PRINT ##
1: SELECT (LED ON)
Exchange Line Numbers
Exchange Line Numbers
## System Programming ##
1523
Figure 6-24 PIOU/PIOUS SMDR Port Data Dump Example
To Next Page
Loading...
