TCOU Exchange Line Interface Unit
DK40 Installation
Strata DK40 I&M Manual Spring 1999
2-33
Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.
TCOU Programming
Program 03: Code 11 is specified automatically when TCOU is installed.
Program 10-1, 2 & 5: Enables or disables line-to-line Conference and Direct Inward System
Access (DISA).
Program 12 & *12: Assigns DISA attributes to lines.
Program 15: Assigns DTMF DISA, and additional attributes to each line.
Program *15: Makes tenant assignments.
Program 16: Assigns lines to line groups.
Program *16: Assigns recall signalling to lines.
Program 39: Assigns line access buttons to digital and electronic telephones.
Program 40: Assigns station access to lines (incoming and outgoing).
Program 41: Assigns station access to lines (outgoing only).
Programs 45~48: Defines Toll Restriction for any line.
Programs 50~56: Defines Least Cost Routing assignments.
Program 78: Assigns special ringing of lines: includes Night Ring Over Page, DISA, Remote
Maintenance via the Internal Maintenance Modem (IMDU), and Integrated Auto Attendant.
Programs 81~89
◆ Assigns lines to ring selected stations.
◆ Assigns Delayed Ringing to any line.
Program 93: Assigns names to lines.
To Next Page
Loading...
