Computer Telephony Integration
Install TSPI and/or StrataLink Packages
8-6
Strata DK40 I&M Manual Spring 1999
Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.
3. Press Driver Set-up to configure the TAPI Service Provider.
4. Select the Com Port that will be used to make the connection to the desktop telephone.
5. You may type a name in the Phone Name box. This name appears in the application on
the PC.
6. Select phone type: 10- or 20- key.
7. Select the switch type from the drop-down menu.
8. Click on Configure Keys to define the functions assigned to each of the telephone
buttons
Note
Current UK software will only support 3 or 4 digit extension numbers. PDN and
SDNs are not currently supported in UK software.
9. Select a button.
10. Choose a function from the list.
Figure 8-8 Configuring the Toshiba Driver
2695
Figure 8-9 Configuring the driver to match the keyset programming
2696
To Next Page
Loading...
