Toshiba Strata DK40 - Requirements; Stratalink & TAPI Service Provider for Windows 95 & NT

Computer Telephony Integration Requirements
8-2
Strata DK40 I&M Manual Spring 1999
Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.
Requirements
To use TAPI with the DKT Service provider, you must have an IBM-compatible PC with 16
MB RAM, running:
◆ Windows '95 or NT4, Windows 3.1 or Windows for Workgroups 3.11
◆ Microsoft TAPI installed. (Most TAPI applications automatically install TAPI as part
of the normal installation process).
Note
Toshiba currently do not support the Installation of StrataLink or the Toshiba Driver
on NT4 Server.
StrataLink & TAPI Service Provider for
Windows 95 & NT
Step 1: Remove Previously installed DKT TAPI Service Provider Applications
1. Click on the Start Button, Settings, then Control Panel.
2. Click on the Start Button, Settings, then Control Panel.
3. Highlight the Toshiba DKT TSPI. Click Remove.
4. A confirmation box asks if you want to remove the driver. Click Yes.
Figure 8-1 Start Bar