Computer Telephony Integration
Installing ACT! 3.0
8-50
Strata DK40 I&M Manual Spring 1999
Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.
Location refers to the Windows Location Parameters established in Telephony Set-up. These
are used to determine PBX dial codes to be inserted prior to dialling the number.
5. Make sure that Lookup Caller using Caller ID must be OFF (not checked).
6. (optional) Other items can be selected based upon the preferences for the desktop.
You can:
◆ hide the dialler (set it to disappear) when the call is done or remain until manually
cleared;
◆ set the timer to automatically start a timer for calls;
◆ set a preference for outbound line (button) selection.
Figure 8-29 ACT! Preference Screen
To Next Page
Loading...
