Install TSPI and/or StrataLink Packages
Computer Telephony Integration
Strata DK40 I&M Manual Spring 1999
8-7
Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.
11. Name the button to match the name on the telephone. Repeat for each button to be
used (see table over page).
Note
StrataLink uses the label to create the customising Trigger Rules. Unique button
names allow rules that apply individually to that button. Buttons with the same
name will have the same rule applied. For example, the two PDN buttons will
follow any rule If {Call Ringing} on PDN the {Pop GoldMine}". All other buttons
will not respond to this rule.
12. Click OK.
Toshiba recommends the following assignements:
Notes
All feature items marked with
*
are only available on DK424, due in 1999.
NOTES FOR WORKING ON NT
1. "Telephony Services" must be running for TAPI and StrataLink to work. This can be
checked by double clicking on the "Services" icon in Control Panel.
1a. Choose the Telephony services from the list box. The Startup column should be set
to Automatic to allow Windows NT to automatically start Telephony Services when an
Application, like StrataLink, attempts to use Telephony.
1b. To change the Startup up to automatic press the Startup button.
1c. Choose Automatic for the Startup types.
1d. Press OK.
DK Button Use
PDN
*
/Intercom Primary Line
SDN
*
Secondary Appearance
PhDn
*
Primary Line
CO Line CO Line
Speed Spees Dial
All Others Feature Key
To Next Page
Loading...
