Computer Telephony Integration
Receiving Information
8-14
Strata DK40 I&M Manual Spring 1999
Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.
LineGetAddressCaps
This function queries the specified address on the specific line device to determine its
telephony capabilities. The Toshiba DKT TSPI returns two sets of values depending whether
the line type defined in Set-up of the driver was set for Prime Line/Intercom or any of the
other types listed. This function fills the data structure of type LineAddressCaps:
dwLineStates
LINEDEVSTATE_OTHER
LINEDEVSTATE_CONNECTED
LINEDEVSTATE_DISCONNECTED
LINEDEVSTATE_OPEN
LINEDEVSTATE_CLOSE
LINEDEVSTATE_NUMCALLS
LINEDEVSTATE_REINIT
LINEDEVSTATE_TRANSLATECHANGE
dwUUIAcceptSize
dwUUIAnswerSize
dwUUIMakeCallSize
dwUUIDropSize
dwUUISendUserUserInfoSize
dwUUICallInfoSize
Not supported by Toshiba DKT TSPI
MinDialParams
MaxDialParams
DefaultDialParams
These will indicate the dial speed, duration and dial pause duration set
by the phone system and are not changeable at the device level
dwNumTerminals Not supported by Toshiba DKT TSPI
dwTerminalCapsSize
dwTerminalCapsOffset
dwTerminalTextEntrySize
dwTerminalTextOffset
Not supported by Toshiba DKT TSPI
dwDevSpecificSize
dwDevSpecificOffset
Not supported by Toshiba DKT TSPI
Field Name Setting
dwLineDeviceID The device ID of the line with which the address is associated
dwAddressSize
dwDevSpecificOffset
A NULL-terminated string reflecting the name of the key on the station.
This is defined during Set-up of the driver
dwDEVSpecificSize
dwDevSpecificOffset
Not supported by Toshiba DKT TSPI
Field Name Setting
To Next Page
Loading...
