Computer Telephony Integration
Extended Services
8-28
Strata DK40 I&M Manual Spring 1999
Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.
DKT Key Access
If an application program needs to operate as the DKT phone connected to the PC, the driver
supports a dialling code feature system. By using the "lineMakeCall" function any key on the
DKT 2000 phone can be activated.
Dialling instructions are indicated by "!" followed by a two digit code which represents
telephone key operations. The following table defines the dialling code for each key
function.
Single Action Keys Single Action Keys Dual Action Keys
Key Name Code Key Name Code Key Name ON OFF
Flex Key 01 !05 Digit 1 !24 Hook Switch !07 !15
Flex Key 02 !13 Digit 2 !32 Mic !45 !48
Flex Key 03 !21 Digit 3 !40 Spkr !44 !46
Flex Key 04 !29 Digit 4 !25 Conf/Trns !22 !23
Flex Key 05 !37 Digit 5 !33 Vol Up !28 !50
Flex Key 06 !00 Digit 6 !41 Vol Dn !36 !38
Flex Key 07 !01 Digit 7 !26 Scroll !47 !49
Flex Key 08 !02 Digit 8 !34 Dial !36 !37
Flex Key 09 !03 Digit 9 !42
Flex Key 10 !04 Digit 0 !35
Flex Key 11 !08 Digit
*
!27
Flex Key 12 !09 Digit # !43
Flex Key 13 !10 Msg !30
Flex Key 14 !11 Redial !14
Flex Key 15 !12 Hold !06
Flex Key 16 !16 Mode !31
Flex Key 17 !17 Page !39
Flex Key 18 !18
Flex Key 19 !19
Flex Key 20 !20
To Next Page
Loading...
