Strata DK40 Port Classification
DK40 Configuration
Strata DK40 I&M Manual Spring 1999
1-15
Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.
Equipment details
Base Cabinet Dimensions- Expansion Cabinet Dimensions-
Height 457mm Height 457mm
Width 310mm Width 198mm
Depth 86mm Depth 86mm
Weight 3.8kg (fully equipped) Weight 2.4kg (fully equipped)
WARNING!
This is a Class A product. In a domestic environment this product may
cause radio interference in which case the user may be required to take
adequate measures.
Type Approval
The Strata DK40 is classified as “Call Routing Apparatus” it is intended to be connected to
the various Public Telecommunications Network Services for the purpose of generating and
terminating “calls”. Table 1-12 lists the intended purposes of all the system interfaces.
The system must be installed in accordance with BS6701 parts 1 and 2, the latest issue shall
apply. The Type Approval number for Strata DK40 is:
609701
Toshiba Information Systems claim approval to OFTEL general variation NS/V/1235/P/
100020. The information contained in this paragraph supports Toshiba’s claim:
The following features require the interconnection of 2 or more exchange lines.
◆ Multi-party conferencing
◆ Call Forward External*
◆ Translation of Un-used Extension numbers*
◆ DISA*
* WARNING: These features can allow an Incoming caller access to an outgoing exchange
line. There is an engineering programming parameter which can disable this feature.
In addition the DISA feature can be “password” protected.
USERS SHOULD BE AWARE THAT THESE FEATURE CAN BE USED FOR
FRAUDULENT PURPOSES.
To Next Page
Loading...
