3.6 Keyboard Test 3 Tests and Diagnostics
TECRA 9100 Maintenance Manual (960-347) 3-13
Subtest 02 Pressed Key Code Display
When a key is pressed, the scan code, character code, and key top name are
displayed on the screen in the format shown below. The Ins, Caps Lock,
Num Lock, Scroll Lock, Alt, Ctrl, Left Shift, and Right Shift keys are
displayed in reverse screen mode when pressed. The scan codes, character
codes, and key top names are shown in Appendix D.
KEYBOARD TEST IN PROGRESS 302000
Scan code =
Character code =
Keytop =
Ins Caps Lock Num Lock Scroll Lock
Alt Ctrl Left Shift Right Shift
PRESS [Enter] KEY
Subtest 03 PS/2 Mouse Connect Check
NOTE: To execute the PS/2 mouse connect check, a PS/2 mouse must be
connected to the computer before the power is turned on.
This subtest checks whether a PS/2 mouse is connected or not.
If this test does not detect an error, it returns to the subtest menu.
If this test detects an error, the following message appears:
DATA COMPARE ERROR
[[ HALT OPERATION ]]
1: Test end
2: Continue
3: Retry
To Next Page
Loading...
