Toshiba TECRA 9100 Series - Operations

3 Tests and Diagnostics 3.23 System Configuration
3-52 TECRA 9100 Maintenance Manual (960-347)
3.23.2 Operations
Selecting 8 from the DIAGNOSTIC MENU and pressing Enter displays the following
system configuration:
System Configuration Display : Ver X.XX [Machine Name ???]
* - Processor Type(Step) = XXXX
**- VGA Controller = XXXX
* - MS-DOS Version = VX.XX
* - BIOS ROM Version = VX.XX 1st ID = XXH, 2nd ID = XXH
* - BOOT ROM Version = VX.XX
* - KBC Version = VX.XX
* - PS Micom Version = VX.XX ( EC Version = VX.XX )
* - Total Memory Size = XXXXXMB ( Conventional Memory = XXXXX KB )
* - Battery Code = XXXXXMB
**- Sound System = XXXXX
* - X Printer Adapter LPT1 = XXXX LPT2 = XXXX LPT3 = XXXX
* - X ASYNC Adapter COM1 = XXXX COM2 = XXXX COM3 = XXXX
*-
* - X Math Co-Processor
* - X PCMCIA Slot
* - X Modem / LAN = XX
* - X Floppy Disk Drive(s) Track = XXXXX Sector = XX
* - X Hard Disk Drive(s) #1 Sectors = XXXXX (XXXXXMB)
#2 Sectors = XXXXX (XXXXXMB)
* - Selective Bay Unit = XXXX
Press [Enter] Key [Date = XXXX-YY-ZZ, XX:YY:ZZ]
Press Enter to return to the DIAGNOSTIC MENU.