Toshiba TECRA 9100 Series - Table 1-7 Power Supply Output Rating

1.9 Power Supply 1 Hardware Overview
TECRA 9100 Maintenance Manual (960-347) 1-23
The power supply output rating is specified in Table 1-7.
Table 1-7 Power supply output rating
Power supplied Yes/No
Device Name
DC
Voltage
(V)
Power off
Suspend
Power off
Boot mode
No battery
*1)
CPU PPV 1.0 to 1.3 No No No
CPU, Pull-ups P0V 1.3 No No No
ICH3-M P1V 1.8 No No No
MCH-M, ICH3-M E1V 1.8 Yes No No
ICH3-M (Always) S1V 1.8 Yes No No
Clock Generator, PWRGOOD P3V 3.3 No No No
Tristar, MCH-M
AGP I/O 1.5 or 3.3 Yes No No
Tristar BGV 1.85 Yes No No
MCH-M, YEBISU3S-GA, Tristar,
PC Card Slot(s), miniPCI
B3V 3.3 Yes No No
YEBISU3S-GA, PC Card Slot(s) B5V 5 Yes No No
Clock Generator, ICH3-M,
YMF753, miniPCI
P3V 3.3 No No No
IPSC, LED's, LCD Panel, miniPCI,
HDD, Flash ROM, Slim Select Bay
*2)
P5V 5 No No No
Pull-ups B15V 15 Yes No No
ICH3-M (Always) S3V 3 Yes Yes No
EC/KBC S5V 5 Yes Yes No
PSC MCV 5 Yes Yes No
ICH3-M (RTC) R3V 3.3 Yes Yes Yes
*1) Both Main battery and Sub Battery are empty, and only RTC Battery is charged.
*2) CD-ROM or DVD-ROM drive Unit is attached.