4 Replacement Procedures 4.24 Antenna Coaxial Cables
4-78 TECRA 9100 Maintenance Manual (960-347)
4.24 Antenna Coaxial Cables
Removing the Antenna Coaxial Cables
To remove the antenna coaxial cables, follow the steps below and refer to figures 4-50 to
4-55.
NOTE: When you open or close the top cover, hold it by the sides close to the hinges to
prevent damage.
1. Remove two silver M2.5×6 screws securing the metal plate.
LCD/FL cable
Metal plate
M2.5×6 silver screws
Figure 4-50 Remove two silver screws securing the metal brace
To Next Page
Loading...
