4.6 Keyboard 4 Replacement Procedures
TECRA 9100 Maintenance Manual (960-347) 4-29
Installing the Keyboard
To install the keyboard, follow the steps below and refer to figures 4-14 to 4-17.
1. Connect the keyboard cable to PJ123 on the system board.
2. Align the latches on the front of the keyboard with the notches in the top cover.
3. Seat the keyboard and secure it with two M2.5×3 black flat-head screws.
4. Seat the keyboard holder and press to secure notches.
5. Turn the computer upside down.
6. Secure the keyboard with one M2×11 silver flat-head screw.
To Next Page
Loading...
