Toshiba TECRA 9100 Series - Appendix A Handling the LCD Module; Appendix Contents

Appendix A Handling the LCD Module
TECRA 9100 Maintenance Manual (960-347) A-1
Appendix A P
Appendix A Handling the LCD Module
Precautions for handling the LCD module
The LCD module can be easily damaged during assembly or disassembly. Observe the
following precautions when handling the LCD module:
1. When installing the LCD module in the LCD cover, be sure to seat it so that it is
properly aligned and maximum visibility of the display is maintained.
2. For 14.4 inch LCD module, be careful to align the four holes at the right side and left
side of the LCD module with the corresponding holes in the LCD cover before
securing the module with four screws.
Do not force the module into place, because stress can affect its performance.
Also, the panel’s polarized surface is easily scarred, so be carefully when handling it.