Toshiba TECRA 9100 Series - Top Cover with Display Assembly; Removing the Top Cover with Display Assembly

4.8 Top Cover with Display Assembly 4 Replacement Procedures
4-33 TECRA 9100 Maintenance Manual (960-347)
4 s
4.8 Top Cover with Display Assembly
Removing the Top Cover with Display Assembly
To remove the top cover with display assembly, follow the steps below and refer to figures
4-20 to 4-23.
1. Turn the computer upside down, and remove the following 12 screws:
• One M2.5×8 black flat-head screw
• Six M2.5×16 screws
• Four M2×12 black flat-head screws
• One M2.5×4 screw
M2.5×16 screws
M2.5×8 black flat-head screws
M2×12 screws
M2.5×8 black flat-head screw
M2.5×16 screw
Figure 4-20 Removing 12 screws from the bottom of the computer