Toshiba TECRA 9100 Series - Setup; Function Description

3.24 SET UP 3 Tests and Diagnostics
TECRA 9100 Maintenance Manual (960-347) 3-53
3.24 SETUP
3.24.1 Function Description
This program displays the current system setup information as listed below:
1. Memory
(a) Total
2. Password (Not Registered)
3. Battery
(a) Battery Save Mode
4. Peripheral
(a) Pointing Devices
(b) Ext Keyboard "Fn" (Ext. Keyboard)
(c) Parallel Port Mode
(d) Hard Disk Mode
5. Display
(a) Power On Display
(b) LCD Display Stretch
6. Boot Priority
(a) Boot Priority
(b) HDD Priority
(c) Power On Boot Select
7. Others
(a) Power-up Mode
(b) CPU Cache
(c) Level 2 Cache
(d) Processor Serial Number
(e) Dynamic CPU Frequency Mode
(f) Auto Power On
8. Configuration
(a) Device Config.
9. I/O Ports
(a) Serial
(b) Parallel
10. PCI Bus