3.21 Running Test 3 Tests and Diagnostics
TECRA 9100 Maintenance Manual (960-347) 3-45
4. Select Yes or No and press Enter. The following message will be appear :
FDD test (R:read/W:read-write) ?
5. Select Yes or No and press Enter. The following message will appear :
Mount the work disk(s) on the drive(s),
then press [Enter] key.
[Warning : The contents of the disk(s),
will be destroyed.]
6. This program is executed continuously. To terminate the program, press Ctrl +
Break.
To Next Page
Loading...
