4.6 Keyboard 4 Replacement Procedures
TECRA 9100 Maintenance Manual (960-347) 4-27
5. Insert your fingernails into notches in the keyboard holder and the computer, and pry
up the keyboard holder to unlatch it at eleven points and remove it.
Keyboard brace
Figure 4-15 Removing the keyboard holder
6. Remove two M2.5×3 black flat-head screws.
7. Rotate out the keyboard and lay it on top of the palm rest.
M2.5×3 black screws
Figure 4-16 Removing two screws
To Next Page
Loading...
