4.7 Wireless LAN Card 4 Replacement Procedures
TECRA 9100 Maintenance Manual (960-347) 4-31
3. Disconnect the wireless LAN antenna cables (black and white) from the wireless
LAN card using an antenna coaxial cable disconnector.
Latches
Wireless LAN antenna
coaxial cable (White)
Wireless LAN antenna
coaxial cable (Black)
Figure 4-19 Disconnecting the antenna coaxial cable
4. Push the wireless LAN card lock latches outward to release the wireless LAN card.
It will pop up to about a 45 degrees angle.
5. Pull out the wireless LAN card. Be careful not to damage the connector.
To Next Page
Loading...
