Configuration Guide 90
Managing System Appendix: Default Parameters
10
Appendix: Default Parameters
Default settings of System Info are listed in the following tables.
Table 10-1 Default Settings of Device Description Configuration
Parameter Default Setting
Device Name The model name
of the switch.
Device Location SHENZHEN
System Contact www.tp-link.com
Table 10-2 Default Settings of System Time Configuration
Parameter Default Setting
Time Source Manual
Table 10-3 Default Settings of Daylight Saving Time Configuration
Parameter Default Setting
DST status Disabled
Default settings of User Management are listed in the following table.
Table 10-4 Default Settings of User Configuration
Parameter Default Setting
User Name admin
Password admin
Access Level Admin
Default settings of System Tools are listed in the following table.
Table 10-5 Default Settings of Boot Configuration
Parameter Default Setting
Current Startup Image image1.bin
Next Startup Image image1.bin
Backup Image image2.bin
Current Startup Config config1.cfg
Next Startup Config config1.cfg
To Next Page
Loading...
