Configuring Layer 2 Multicast Configuration Examples
Configuration Guide
275
Figure 7-5 Enable IGMP Snooping for VLAN 10
5) Choose the menu L2 FEATURES > Multicast > IGMP Snooping > Port Config to load
the following page. Enable IGMP Snooping for ports 1/0/1-4.
Figure 7-6 Enable IGMP Snooping for the Ports
6) Click to save the settings.
7.1.4 Using the CLI
1) Create VLAN 10.
Switch#configure
Switch(config)#vlan 10
Switch(config-vlan)#name vlan10
Switch(config-vlan)#exit
To Next Page
Loading...
