Configuration Guide 524
Configuring AAA AAA Configuration
Step 4 show aaa group [
group-name
]
Verify the configuration of server group.
Step 5 end
Return to privileged EXEC mode.
Step 6 copy running-config startup-config
Save the settings in the configuration file.
The following example shows how to create a RADIUS server group named RADIUS1 and
add the existing two RADIUS servers whose IP address is 192.168.0.10 and 192.168.0.20
to the group.
Switch#configure
Switch(config)#aaa group radius RADIUS1
Switch(aaa-group)#server 192.168.0.10
Switch(aaa-group)#server 192.168.0.20
Switch(aaa-group)#show aaa group RADIUS1
192.168.0.10
192.168.0.20
Switch(aaa-group)#end
Switch#copy running-config startup-config
2.2.3 Configuring the Method List
A method list describes the authentication methods and their sequence to authenticate
the users. The switch supports Login Method List for users of all types to gain access to
the switch, and Enable Method List for guests to get administrative privileges.
Follow these steps to configure the method list:
Step 1 configure
Enter global configuration mode.
To Next Page
Loading...
Need help?
General