Configuration Guide 517
Configuring AAA AAA Configuration
2.1.2 Configuring Server Groups
The switch has two built-in server groups, one for RADIUS servers and the other for
TACACS+ servers. The servers running the same protocol are automatically added to the
default server group. You can add new server groups as needed.
Choose the menu SECURITY > AAA > Server Group to load the following page.
Figure 2-3 Add New Server Group
There are two default server groups in the list. You can edit the default server groups or
follow these steps to configure a new server group:
1) Click
and the following window will pop up.
Figure 2-4 Add Server Group
Configure the following parameters:
Server Group Specify a name for the server group.
Server Type Select the server type for the group. The following options are provided: RADIUS
and TACACS+.
Server IP Select the IP address of the server which will be added to the server group.
2) Click Create.
To Next Page
Loading...
