Configuration Guide 418
Configuring DHCP Service Appendix: Default Parameters
5
Appendix: Default Parameters
Default settings of DHCP Relay are listed in the following table.
Table 5-1 Default Settings of DHCP Relay
Parameter Default Setting
DHCP Relay
DHCP Relay Disable
DHCP Relay Hops 4
DHCP Relay Time Threshold 0
Option 82 Configuration
Option 82 Support Disabled
Option 82 Policy Keep
Format Normal
Circuit ID Customization Disable
Circuit ID None
Remote ID Customization Disabled
Remote ID None
Default settings of DHCP L2 Relay are listed in the following table.
Table 5-2 Default Settings of DHCP L2 Relay
Parameter Default Setting
Global Config
DHCP Relay Disabled
VLAN Status Disabled
Port Config
Option 82 Support Disabled
Option 82 Policy Keep